WYLER Levelmeter 2000 - Page 3

Page 3 of 31 Pages
INDEX
Key word
A
Chapter Page
Absolute measurement 3.9.1 24
Absolute measurement/Relative measurement 3.9 24
Address sensor 2.1.1 7
Angular position and direction of connector 2.1.2.2 8
B
Battery / Care and handling of the batteries 6.2 28
Battery display "BATT" 2.2.2 11
Battery lifetime 4.3 26
Battery powered 4.1 27
Battery-Display 2.1.1 7
C
Calibrating of ZEROTRONIC sensors 6.5 30
Changing of sensor address 6.4 29
Checking the functions 3.1 13
CLINOTRONIC PLUS 1.3 6
Configurations(instruments and sensors) 1.3 6
Connections with sensors and instruments 1.3 6
Correct horizontal position 2.1.2.1 8
D
Data format OUT-Port 3.5 20
Default values, basic standards 3.1 13
Description of panel functions 2.1 7
Description of the CLINO 2000 1.1 5
Description of the panel 2.2.2 11
Direction of the inclination 2.2.2 11
Disabling the automatic shut-off of the LEVELMETER 2000 2.1.2.2 8
Display and panel 2.1.1 7
E
ENTER key 2.1.1 7
ENTER key 2.2.1 9
Error messages 3.1 13
Error messages 5 28
Express Repair Service, ERS 7 31
External power supply 4.1 27
F
Filter 3.8 23
Format of transmission 3.5 20
Functions of Levelmeter 2000 used with ZEROTRONIC sensors, 3.0 12
H
HOLD key 2.1.1 7
HOLD key 2.2.1 10
HOLD-Function 3.4 19
How to use the LEVELMETER “=== 3 13
I
Introduction 1. 5
K
Key functions, description 2.2.1 9
L
LEVELTRONIC NT 1.3 6
LIMITS 3.10 26
M
Main display 2.1.1 7
Measurement with relative base length 3.3 18
Measurements with ZEROTRONIC sensors 2.1.2.2 8
Measuring by setting LIMITS 3.10 26