Wynn Marine Type D MKV - User Manual

Wynn Marine Ltd
2-4 Merse Road, North Moons Moat, Redditch, Worcestershire B98 9HL, United Kingdom
Tel: +44 (0) 1527 61243, Fax: +44 (0) 1527 66836
Email: customerservice@b-hepworth.com, website www.b-hepworth.com
These manuals have been page checked for completeness, the soft copy and hard copy are
identical in every respect and these manuals are Fit For Purpose and appropriate to the equipment
fitted on the Khareef Class Ships.
WARNING: A suitably qualified person should perform all installation and maintenance. All electrical wiring should be carried out in
accordance with relevant regulations. Ensure all products are correctly earthed and all connections are made in accordance with the
wiring diagram. Non-compliance may result in damage, malfunction or personal injury. Before commencing any installation or
maintenance work, ensure that the electrical supply is disconnected.
Installation and Operation Manual
Type D MKV Straight Line Wiper
Series 8000 Network Control System
Issue 7

Summary

GENERAL INFORMATION AND SAFETY SUMMARY

Safety Precautions

Warnings before working on the wiper system.

TYPE D5 DESCRIPTION AND SPECIFICATION

Motor Specifications

Details motor types, voltage, current, speed, and protection ratings.

TYPE D5 WIPER INSTALLATION

Stud Mounting

Instructions for installing wipers using stud mounting.

Bracket Mounting

Instructions for installing wipers using bracket mounting.

GENERAL FAULT FINDING GUIDE

Common Wiper System Faults

Troubleshooting common issues like power, motor, carriage, and belt problems.

Wiper Speed, Noise, Cleaning and Parking Issues

Diagnosing and fixing issues with wiper speed, noise, cleaning and parking.

Heater and Washer System Faults

TYPE D5 WIPER MAINTENANCE

6-Month Maintenance Schedule

Maintenance tasks for DC motors every six months.

12-Month Maintenance Schedule

Maintenance tasks performed every twelve months.

TYPE D5 WIPER INSPECTION;RENEWAL OF PARTS

Blade Replacement Procedure

Arm Replacement Procedure

Drive Belt Replacement Procedure

SERIES 8000 CONTROL SYSTEM

The Keypad

The Wiper Motor Control PCB

System Compatibility And Requirements

Integrated Fault Diagnosis

Diagnostic Real-Time Fault Functions

Explanation of diagnostic LED functions and fault indications.

INSTALLING DEVICENET BUS CABLES

General Guidelines for Bus Cable Installation

DeviceNet Bus Cable Selection

Common RS-485 Wiring Errors

SERIES 8000 CONTROL SYSTEM WIRING

INSTALLATION OF SHIELDED TWISTED PAIR CABLE

8500 KEYPAD

8500 KEYPAD OPERATION

User Operational Description

Keypad Icons Explained

Systems with Multiple Keypads

8500 KEYPAD USER-PROGRAMMING

Introduction to User Programming

Overview of user-programmable settings.

Entering and Exiting User Set-Up Mode

Steps to enter and exit the keypad's set-up mode.

Programming Intermittent Wiper Periods

Programming Wash Cycle Timings

Programming Wash;Air Purge with Extended Wipe

Restoring Default Wipe and Wash Timings

8200 MODULE

Technical Specifications

Module PCB Replacement

Rack Unit Installation

19 Rack Module PCB Replacement

8000 System Wiring Diagrams for D Type Wipers

Troubleshooting Flowchart - Start

Troubleshooting Flowchart - Keypads

Troubleshooting Flowchart - Module

Troubleshooting Flowchart - Wash;Purge

Troubleshooting Flowchart - Heaters

Troubleshooting Flowchart - Unexpected Behaviour

Troubleshooting Flowchart - Error LED Decoding

Troubleshooting Flowchart - Bus

Wynn Marine Type D MKV Specifications

General

Brand	Wynn Marine
Model	Type D MKV
Category	Ultrasonic Jewelry Cleaner
Language	English