To Next PageTo Next Page
Need help?Do you have a question about the Wyred 4 Sound STI and is the answer not in the manual?
Details what is included in the STI series packaging and how to inspect for shipping damage.
Explains the philosophy behind Wyred 4 Sound products and their commitment to quality and customer satisfaction.
Describes the functions of the front panel controls, including power, input selection, and volume.
Provides step-by-step instructions on how to enter and navigate the setup menu for customization.
Describes the 12VDC remote trigger input and output for automated power up and HT configuration.
Provides critical safety precautions and notes for connecting speakers and power to the amplifier.
Provides guidance for diagnosing and resolving common operational issues with the amplifier.
Troubleshooting steps for when no audio is produced, checking power, connections, and signal.
Information on amplifier faults, checking outputs, speaker connections, and potential causes.
Lists warranty exclusions, limitations, and disclaimers of other warranties.
Details the procedure for returning the component for repair, including the requirement for an RA number.
Notes that voltage settings are fixed at the time of purchase and cannot be easily changed.
General| Type | Integrated Amplifier |
|---|---|
| Input Impedance | 47k Ohms |
| Total Harmonic Distortion | <0.005% |
| Inputs | RCA, XLR |
| Outputs | Speaker terminals, RCA pre-out |
