Copyright © 2021 WyreStorm Technologies | wyrestorm.com
HALO 30 | HALO 60 Quickstart Guide | 210708
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
support@wyrestorm.com
1 of 4
Halo Series Plug and Play Portable Conference
Speakerphone
HALO 30 | HALO 60
Quickstart Guide
Setting up the Speakerphone
Connecting via Bluetooth
®
(ONLY APPLICABLE FOR HALO 60)
CONNECTING THE SPEAKERPHONE
CONNECTING TO A LAPTOP/PC
1. Connect the supplied USB Type-C cable into
the port at the base of the speakerphone.
2. Connect the other end of the supplied cable
into an available port on your PC or Laptop.
3. The speakerphone will automatically power
on, which is indicated by the Power LED
shown below.
1. Navigate to your connectivity settings
on your device and ensure Bluetooth is
switched on.
2. Click on Add Bluetooth or other device.
Then a new menu should appear. Click
the Bluetooth option.
3. A list of all discoverable Bluetooth
devices should now appear. Click on
the Device named WyreStorm HALO
60 and after a few seconds, you will be
connected.
Note: If the Speakerphone is powered off and there is still a USB device connected,
simply hold the Power button for 2 seconds and the device will power on.
To begin, make sure that the Speakerphone
is discoverable. To do this, simply press the
Bluetooth button on the device. The LED will light
blue when the Speakerphone is discoverable.
To Next Page
Need help?
General
