4K HDBaseT™ Low Prole Receiver
with Scaling & Dual Ethernet Ports
RX-70-4K-SCL v1
Quickstart Guide
IMPORTANT! Installation Requirements
• Install the latest rmware to ensure that all features described in this
document are available.
• The following items are required for Setup and Conguration.
o PC or Mac
o Telnet and Terminal software such as PuTTY.
o USB to 3-pin Port Adapter Cable (Included)
o Network router and/or switch for quick conguration after installation
without the need to connect directly.
In the Box
1x RX-70-4K-SCL Scaling Receiver
1x 12V DC 3A Power Supply
1x AC Cable
2x 3-pin Phoenix Connector
1x IR Emitter
1x IR Receiver
1x USB to 3-pin RS-232 Port Adapter Cable
2x Mounting Brackets
1x Quickstart Guide (this document)
Additional Information
Setup and control of the receiver for functions such EDID and audio
volume commands can be found in the RX-70-4K-SCL API. This and other
documentation pertaining to this product can be found in the Downloads Tab
located on the product page at WyreStorm.com.
Copyright © 2017 WyreStorm Technologies | wyrestorm.com
RX-70-4K-SCL v1 Quickstart Guide | 170718
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
support@wyrestorm.com
1 of 4
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation
process.
Basic Wiring Diagram
RX-70-4K-SCL
H2 Matrix with ARC
UHD Display
HDMI In
IR Emitter
IR Recei
Amplifier
ver
Ethernet
rol System
IR RX
CAB-IR-LINK (Sold Separately)
IRDigital Audio Analog Audio
Key
HDMI/Digital Video HDBaseT/Ethernet
or