Wyrestorm SW-0501-HDBT - User Manual

IMPORTANT! Installation Requirements!
• Visit the product page to download the latest rmware, document versions,
and the WyreStorm Maintenance Suite conguration tools.
• Install the latest rmware to ensure that all features described in this
document are available.
• WyerStorm recommends the use of static IP addresses to ensure that the
devices IP address will not change after power is restored or if network
components are changed. See Switcher First Time Conguration for details
on changing the IP Address.
• In order to use ScreenLink software is required on the presentation PC. See
ScreenLink Presentation Software for details on using ScreenLink
• When using ScreenLink, the switcher is required to be on the same Local
Area Network (LAN) as the presentation PCs.
In the Box
1x SW-0501-HDBT Presentation Switcher
1x 100~240V AC 50/60Hz Power Cord with US Plug
1x 11-pin Phoenix Connector
2x 4-pin Phoenix Connector
3x 3-pin Phoenix Connector
1x Table Mounting Bracket Kit
1 x Quickstart guide (This Document)
Additional Information
Visit the product page on wyrestorm.com to download additional
documentation, rmware, software, and control drivers.
• SW-0501-HDBT Latest Firmware
• SceenLink Presentation Software for PC or Mac
• Control System API
• Control Drivers for Various Control Systems
Copyright © 2017 WyreStorm Technologies | wyrestorm.com
SW-0501-HDBT Quickstart Guide | 170327
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
support@wyrestorm.com
1 of 4
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the
installation process.
Basic Wiring Diagram
The following diagram is provided to illustrate a typical basic system containing the SW-0501-HDBT.
KEY
HDMI/DisplayPort
HDBaseT/Ethernet Speaker Level Audio
Analog Video
Analog Audio
Power
Analog Audio
VGA Source
Wireless
Router
VGA Video
Podium PC
with Microphone
HDMI
Speaker Level Audio
IR RS-232
Ethernet
Ethernet
RX-70-4K
5x1 HDMI over HDBaseT Presentation Switcher/Scaler
with Mic Input and CEC control (1080p to 100m/328ft)
SW-0501-HDBT
Quickstart Guide

Wyrestorm SW-0501-HDBT Specifications

General

Input Ports	5
Output Ports	1
Max Resolution	4K@60Hz
HDBaseT Transmission Distance	100m
Video Bandwidth	18 Gbps
HDMI	2.0
HDCP	2.2
EDID Management	Yes
Power Supply	12V DC
Operating Temperature	0°C to 40°C
Power over Ethernet	No
Control	RS-232, IR

Summary

Installation Requirements

Download Latest Firmware and Tools

Wiring and Connections

Wiring Guidelines

Follow guidelines for cable types, lengths, and interference to ensure optimal performance.

Setup and Configuration

Switcher First Time Configuration

Step-by-step guide to configure the switcher's IP address before network connection.

ScreenLink Software Installation

Instructions for installing the ScreenLink presentation software on a PC.

Specifications

Troubleshooting Guide

Picture Quality Issues

Solutions for no or poor picture quality, including PoH and cable checks.

Device Control Problems

Troubleshooting intermittent 3rd party device control issues with IR and RS-232.

Troubleshooting Tips