Need help?Do you have a question about the X-CHAIR X1 and is the answer not in the manual?
General| Product Type | Office Chair |
|---|---|
| Weight Capacity | 250 lbs |
| Adjustable Height | Yes |
| Seat Depth | Adjustable |
| Seat Material | Mesh |
| Tilt Lock | Yes |
| Material | Mesh |
| Lumbar Support | Dynamic Variable Lumbar |
| Armrests | Adjustable |
| Base Type | Aluminum Base |
| Backrest | Mesh |
| Adjustable Features | Seat Height, Seat Depth, Lumbar Support, Armrest Height, Tilt Angle, Tilt Tension |
| Warranty | 5 years |
Press casters firmly into the holes on the base to start assembly.
Place the gas lift into the base and handle with care due to oil transfer risk.
Place seat cushion on gas lift; test height adjustment by raising and lowering.
Attach armrests to the seat cushion, ensuring correct left/right placement and securing with screws.
Connect the backrest to the seat using screws and an Allen wrench for tightening.
Screw the headrest onto the backrest using the Allen wrench and cover the screws.
Adjust headrest height using handles for 2.75" vertical range.
Adjust headrest angle by twisting handles for 80 degree range.
Adjust backrest height by pulling up; lower by raising to highest setting then releasing.
Lumbar support auto-adjusts to body weight and shape for personalized comfort.
Use the height adjustment lever on the right knob to raise or lower the seat.
Use the height adjustment paddle on the left side to raise or lower the seat.
Use the depth adjustment lever on the left knob to slide and lock seat position.
Use the depth adjustment paddle on the left side to slide and lock seat position.
Adjust recline resistance using the knob on the right side for personalized comfort.
Pull out the knob, turn forward to unlock, backward to lock; recline to desired angle.
Press the paddle up, recline chair, lower paddle to lock; 4 lock positions available.
Adjust armrest height by pulling up or lowering to highest setting; 9 positions, 3.5" range.
Adjust armrest width by pulling/pushing; adjust depth by pushing forward/backward.
Pivot armpad right or left for 18 degrees of motion for natural arm resting.
Notices on armpad care, caster care, and indoor use limitations.
To Next Page
