X-Laser® Safety Labels
Please see the last page of this manual for label copies and placement.
Safety Notices
1.Your X-Laser® product is a powerful laser device intended for aerial
indoor lighting displays operated by professionals. The major concern
with professional laser systems is to avoid human contact with the laser
beam and to create a safe area where patrons and staff can enjoy your
light show. Please observe the following guidelines when using your X-
Laser® product.
2. It is your responsibility to use your high power safely and conform to
FDA regulations. If you need a variance for a Class IIIB or IV X-Laser®
you may either apply for one yourself or purchase an X-Laser® EZ Vari-
ance Kit from one of our dealers. Penalties for not having an active vari-
ance or using an illegal laser are significant.
3. Do not expose the human eye directly or indirectly to focused or scat-
tered laser radiation as loss of vision, complete blindness, and/or other
serious injuries may result.*
4. This fixture is NOT intended for audience scanning effects. Operators
must ensure that the primary laser beam and any reflected beams re-
main at least 3.0 meters in lateral and vertical separation from any per-
son or persons.
5. This unit is intended for indoor use only and should be at all times be
protected from fluids, condensation and excessive humidity. Do not ex-
pose this fixture to temperatures outside of its’ normal working range of
60-90 degrees F.
6. There are NO user serviceable parts inside of the fixture. Opening the
outer housing will void the warranty and could result in radiation expo-
sure. Any modifications to the fixture are prohibited, may be dangerous,
and will immediately void the factory warranty.**
To Next Page
Loading...