Need help?Do you have a question about the X-METAL 15661 and is the answer not in the manual?
Connects vertical posts (CK-A1) and horizontal rails (SR-C3) using screws.
Slides the main horizontal slats (SR-C4) into the gate frame.
Attaches reinforced slats (SR-C4a) for automation, includes multilingual notes.
Fastens the horizontal slats (SR-C4) to the frame using screws (CK-E36).
Installs various brackets and hinge components (CK-A5, CK-A7, AT-A5a, Dr-A5c) onto the gate posts.
Secures primary hinges and supports (AT-7, AT-8, AT-9, AT-10, Dr-24, CK-E30, CK-E31) to the posts.
Installs the gate lock (Dr-20, Dr-23, Dr-26) and associated hardware.
Demonstrates correct operation and adjustment of the gate lock mechanism (Dr-20).
Attaches bottom hinges and supports (Dr-12, CK-E32) to the ground or foundation.
Secures upper hinges and supports (Dr-11, CK-E32) to the gate posts.
Connects the gate panels to the previously installed post hinges and supports.
Attaches components for motorizing the gate (Dr-15, Dr-31, Dr-11, Dr-12).
Fixes the central stop mechanism (Dr-16, CK-E34, CK-E35) to keep the gate stable.
Specifies the correct zone on the gate for installing automation equipment.
General| Brand | X-METAL |
|---|---|
| Model | 15661 |
| Category | Fencing & Gates |
| Language | English |
To Next Page