ENGINE STARTING
1. Turn the ON/OFF switch to ON position
2. Turn the choke lever to CLOSE position
Notice
When the engine is hot or the temperature is not cold. Don’t need close the
choke
● Move the choke lever to CLOSE
position. The choke should be
closed on a case-specific basis it
may help starting in colder
environment.
3. press the fuel pump several times until there is no air bubble visible in the
fuel line.
● It is not allowed to start or run the
engine without the connection of
return line of the fuel tank to the
carburetor.
● It is not allowed to start or run the
engine for a long period without the
tank cap closed.
To Next Page
Loading...