X-Rite i1Display - Page 5

CalMAN Setup Guide: X-Rite i1DisplaY
5

0.4 Seconds

0.5 Seconds

0.6 Seconds

0.7 Seconds

0.8 Seconds

0.9 Seconds

1 Second (default)

1.25 Seconds

1.5 Seconds

2 Seconds
Low Light Handler
When enabled, the low light handler averages multiple meter samples per
measurement, when measuring light levels below the specified Low Light
Trigger level.
Note: For better low light accuracy on many consumer TVs, the following Low
Light Handler options are recommended:

Low Light Handler: Enabled

Low Light Mode: 4 or 5 Seconds

Low Light Trigger: 1 cd/m
2