-5-
Clear single program
1. Press and hold SHARE + OPTIONS/10/Menu for 3 seconds until
the green LED turns on
2. Press programmed button and the green LED will
start blinking.
3. Press programmed button again and the green LED will turn
off. The single programmed button is now cleared.
Clear all programs
1. Press and hold SHARE + OPTIONS for 3 seconds until the green
LED is on
2. Press OPTIONS and hold for 4 seconds. The green LED will
turn off. All of the programmed buttons are cleared with defaults
restored
Note: All settings are reset when the steering wheel is turned off.
ENG
To Next Page
Loading...