x-sense RC01 User Manual

RC01 Remote Controller
Manual
Thank you for purchasing this product. To ensure proper use and trouble-free operation, please
read this manual carefully and store it in a safe place for future reference.
Introduction
The RC01 is a dedicated remote controller for the X-Sense wireless interlinked alarms. It easily
controls the paired smoke alarms, sparing users the effort of straining and reaching up to the
ceiling for alarm testing and silencing.
Note: The X-Sense wireless interlinked alarms are not included in the package. Please purchase
them individually.
Important Safety Instructions and Guidelines
Do not hold the test button for an extended period of time or press repeatedly.
Do not modify this device under any circumstances.
Only use the batteries specified and be sure to match the polarity marking.
Package Contents
1 × Remote Controller (Battery Included)
1 × Adhesive Tape
1 × Key
2 × Screw
2 × Anchor Plug
1 × Manual

x-sense RC01 Specifications

General

Brand	x-sense
Model	RC01
Category	Remote Control
Language	English

Summary

Introduction

Important Safety Instructions and Guidelines

Package Contents

Product Overview

Operating Instructions

Battery Installation

Step-by-step guide to open the remote, insert the battery correctly, and close the cover.

Pair Remote Control with the X-Sense Wireless Interlinked Alarm

Instructions for pairing the remote with X-Sense alarms, involving button presses on both devices.

Test the Wireless Connection Between Alarms

Steps to test the communication between the remote and alarms by pressing the test button.

Silence the Alarms

How to silence alarms caused by non-emergency smoke, and how to silence the initiating alarm.

Test the Alarm's Power Status

Procedure to check the remote controller's power status by pressing the test button.

Technical Specifications

Troubleshooting

FCC Statement

Disposal