Need help?Do you have a question about the x-sense WS01 and is the answer not in the manual?
General| Connectivity | Wireless |
|---|---|
| Sensor Type | Photoelectric |
| Alarm Volume/Sound Level | 85 dB |
| Operating Humidity | 10% to 85% non-condensing |
| Interconnectivity | Up to 24 interconnected alarms |
| Certifications | CE |
Instructions for initial activation, involving pressing and holding the button for a set duration.
Recommendations for optimal placement near common household water sources prone to leaks.
Simple instructions for positioning the sensor on a flat surface for effective detection.
Key advice to prevent false alarms or non-triggering by ensuring correct orientation and surface placement.
Troubleshooting steps for when the device fails to activate or trigger during a water leak.
Understanding the low battery notification and the need for immediate battery replacement.
To Next Page