X-Taste X3 - Operation: Power Up Device; Powering On;Off Device; Operation: Coil Resistance Measurement; Measuring Coil Resistance

7
3. Operation (Power Up Device)
- Short press “Fire” button 3 times to power up devices.
- This design is to avoid “fire” being trigger accidently.
- Device auto enter power off mode after 6 minutes of idling.
4. Operation (Coil Resistance measurement)
- Press “
left
” + “right” for coil resistance measurement.
- Manually lock resistance for temperature control. Otherwise resistance will automatic
lock under temperature control mode.
Firmware version