X-Taste X3 - Specification and Features; Device Specifications; Atomizers Output Parameters; RBA Details

3
1. Specification and features
 Model: X3
 Dimension: Height x Width x Length (80mm x 28mm x 41.2mm)
 Weight: 134g
 Body Material: Zinc Alloy
 Atomizers Connector: Stainless Steel 510 Connection, Nickel Plated Brass Contact
 Display: 0.91 inch OLED
 Single Cell 18650
o
3.7V
o Easy replaceable 18650 battery
 Atomizers Output
o Output power range: 5W ~ 90W
o Output current range: 0A ~ 25A
o
Output voltage range: 0.5V ~ 9.5V (Buck-Boost DC-DC converter)
 RBA
o Stainless steel 304, size:22mm x 37mm
o Best power range 30W~50W
o Maximum power: 80W (For 90W usage, please purchase separate RDA for optimum
performance)
o 4.2ML juice capacity
o
3 airflow holes
o Including 1 x 0.25Ohm and 1 x 0.5ohm coil head.
 Power consumption (Without fire): 0.22W
 Very low standby current: 60.0uA
 Efficiency depends to the battery performance, coil resistance and power. Power range
40~70W will have a best efficiency performance.
 Coil resistance
o Measurement range 0.04Ohm ~ 10Ohm
o Resolution: 1m Ohm (based on 0.1ohm measurement)
 Power control mode
o Recommended resistance range: 0.08Ohm~3Ohm
o
Coil over heat protection. Refer to coil material table for detail.
 Temperature control mode
o Recommended resistance range: 0.08Ohm~2Ohm
o Repeatability: 1 degree Celsius / 1.8 Fahrenheit
o
Support Ni-200, Ti 01/02, SS316L, NiFe30, NiFe70. Refer to coil material table for
detail.
o
Temperature adjustment range can be change through “X-Taste Advance”.
o
Dry coil protection.