Need help?Do you have a question about the X-TREME XG-550 and is the answer not in the manual?
Highlights the importance of wearing a helmet and obeying all traffic laws while riding the scooter.
Details the necessity of using a 32:1 gas/oil mixture for the 2-stroke engine.
Specifies that the product is not for off-road use and failure to follow instructions voids the warranty.
Outlines essential rider capabilities, responsibilities, and recommended safety equipment.
Provides a summary of essential safety practices for fuel handling, maintenance, and product use.
Provides contact information for customer support, including phone number and website.
Lists the key features and technical specifications of the XG-550 gas scooter.
Instructions for unfolding the scooter and properly installing the 10-amp fuse.
Safe steps for fueling the scooter with the correct gas and oil mixture.
Guides on how to start the scooter using the electric push start or pull start methods.
Instructions on how to operate the throttle, steer, and use the brakes for safe riding.
Steps for safely folding the scooter for storage or transportation.
Details on proper fuel mixing and the procedures for starting the engine.
Lists necessary tools and provides instructions for adjusting carburetor idle speed and air/fuel mixture.
Guide on cleaning the air filter and adjusting the scooter's braking system.
Information on correct tire pressure, wheel assembly, and tire wear.
Instructions for adjusting the head unit and ensuring proper drive chain tension.
Routine maintenance tasks recommended for daily and weekly checks to ensure optimal performance.
Step-by-step guide to setting the correct tension for the scooter's drive chain.
Instructions for securely mounting the handlebars onto the scooter.
Procedure for correctly mounting and adjusting the front brake assembly.
Guidance on how to safely install the front wheel onto the scooter.
Steps to adjust the tension and engagement of the front hub brake system.
Steps to adjust the tension and engagement of the rear hub brake system.
Instructions for routing and connecting the throttle cable to the carburetor.
Procedure for replacing the electric start mechanism and its associated wiring.
Guide on correctly connecting the fuel lines to the engine.
Steps for installing the ignition coil, ensuring proper gap for spark.
Instructions on how to install the pull starter mechanism onto the engine.
Procedure for replacing the yellow start button assembly.
Detailed steps for removing and reinstalling the scooter's transmission.
Instructions on how to detach and remove the engine from the scooter frame.
Explanation of the different battery connection wires and their functions.
Guide on how to inspect fuel lines for kinks or blockages.
Step-by-step instructions for replacing the starter solenoid unit.
Procedure for properly installing new bearings into the wheel hub.
Method for testing the ignition system to ensure it produces a spark.
Instructions for adjusting the air/fuel mixture on non-US models.
Guide on how to replace the charging socket assembly.
Steps for safely removing the free wheel clutch from the hub.
Procedure for replacing the fuse holder component.
Techniques for removing broken bolts and screws from the scooter.
Troubleshooting steps for identifying why the scooter is not moving.
Steps to diagnose a faulty starter solenoid.
Diagram illustrating the front brake assembly and its components.
A visual representation of the scooter's electrical wiring connections.
Diagram and list of parts for the rear wheel assembly.
Diagrams illustrating the voltage regulator wiring and front fork assembly.
Exploded view diagram identifying individual motor components.
Provides contact channels for general information, parts, and support.
To Next Page
General
