To Next Page
R
Randy ThomasAug 7, 2025
What to do if the X2 POWER SLC10003A has a flashing red LED?
- MMichelle PenaAug 7, 2025
If the red LED is flashing, it indicates reverse polarity. To resolve this, reverse the battery connections.
What to do if the X2 POWER SLC10003A has a flashing red LED?
If the red LED is flashing, it indicates reverse polarity. To resolve this, reverse the battery connections.
Why is the X2 POWER Battery Charger showing a solid red LED?
A solid red LED indicates that the X2 POWER Battery Charger is in Standard Charging Mode. To resolve this, change the charge mode to Recovery Mode.
What to do if the X2 POWER SLC10003A has a flashing yellow LED?
A flashing yellow LED on the X2 POWER Battery Charger indicates that the battery capacity may be too high for the selected mode. To fix this, verify the battery capacity and charge mode. If the battery capacity is within the appropriate range, switch the charge mode to Recovery Mode.
Why is the X2 POWER SLC10003A Battery Charger showing a solid yellow LED?
A solid yellow LED indicates that the battery voltage is either too high or too low for the selected mode. Verify the battery voltage and charge mode to ensure they are correctly configured for the X2 POWER Battery Charger.
General| Output Current | 10A |
|---|---|
| Battery Type | Lithium-ion |
| Voltage | 12V |
| Amperage | 10A |
| Input Voltage | 120V AC |
Key safety rules to prevent fire, electric shock, and injury during charger operation and battery handling.
Essential precautions for working near batteries, including personal protection, tool usage, and handling acid.
Guidance on physically attaching the charger using provided screws and ensuring proper clearance.
Recommendations for positioning the charger away from the battery to prevent corrosion and ensure ventilation.
Instructions on how to select the correct charging mode for different battery types and conditions.
Detailed breakdown of each charging mode, including voltage, description, output, and battery size compatibility.
Approximate time required to charge batteries based on their capacity (Ah) for 12V/6V operation.
Essential steps to take before connecting the charger, including battery removal and terminal cleaning.
Step-by-step guide for safely connecting the charger clamps or eyelets to the battery terminals.
How to begin the charging cycle after connecting the charger, including Stand By mode indication.
Explanation of the LED displays that indicate the battery's current state of charge (SOC).
Guide to common error conditions indicated by LED displays and their respective reasons and solutions.