08905155A - 8 -
Digital Optical (OPTICAL IN)
Use a Digital Optical Cable to connect an audio source that has a Digital Optical output.
NOTE: Be sure the RCA/OPT/COAX switch is ‘middle’ and set to ‘OPT’.
Note: Multi-channel digital audio formats (5.1, 7.1, etc.) are not supported by the D5IP. Most audio/video sources allow you to change the digital output
to PCM Stereo. In most cases, this will allow multi-channel audio sources to output a “summed” stereo signal through the digital output. Consult the
audio/video source manual for details.
Digital Coaxial (COAX IN)
Use a Digital Coaxial Cable to connect an audio source that has a Digital Coaxial output.
NOTE: Be sure the RCA/OPT/COAX switch is ‘down’ and set to ‘COAX’.
Note: Multi-channel digital audio formats (5.1, 7.1, etc.) are not supported by the D5IP. Most audio/video sources allow you to change the digital output
to PCM Stereo. In most cases, this will allow multi-channel audio sources to output a “summed” stereo signal through the digital output. Consult the
audio/video source manual for details.
To Next Page
Loading...
