Xblitz GO User Manual

28
www.xblitz.pl
FAQ:
1) The device does not turn on, the display is blinking.
 It is necessary to charge the device’s battery before the first use.
2) The device does not turn on,/turns off automatically.
 The reason for this may be constant powering by the cigarette lighter socket.
3) The device reboots while driving.
 Check the power source.
4) Loop recording does not work (the device records randomly).
 Check the functions "MOTION DETECTION" and "PARKING SURVEILLANCE". They both should be turned off while driving.
5) The device displays the message "memory card full"
 Check the "G-sensor" and "PARKING SURVEILLANCE" sensitivity settings – both should be set at a minimum.
 The memory card must be formatted in FAT32 format first on the PC and then on the recorder.
6) The device records the noise and distorted, indistinct sound:
 The device has a very sensitive microphone, which records all the sounds from the environment. The sounds may overlap. Airflow
windscreen effectively distorts the sound too.

Xblitz GO Specifications

General

Brand	Xblitz
Model	GO
Category	Dash Cameras
Language	English