Xblitz S10 DUO - Photo Mode; Playback Mode; General Menu

22
7. Timestamp – allows you to turn the date and time stamps on the videos you're
recording on/ o.
8. G-Sensor – allows you to set the sensitivity of the gravity sensor.
9. Mirror image – reflects the rear view camera image at 180 degrees.
PHOTO MODE:
1. Self-timer – allows you to set how much time passes between pressing
the OK button and taking a photo in PHOTO mode.
2. Resolution – allows you to set the resolution of the photos taken.
3. Series – allows you to set how many photos will be taken after pressing
the OK button.
4. Quality – changes the quality of photos, the higher the quality, the bigger the
files.
5. Sharpness – sets how clear the details are in photos taken by the device.
6. White balance – allows you to adjust the camera parameters to the prevailing
lighting.
7. Color – applies a filter (black and white or sepia) to photos taken with the camera.
8. ISO – allows you to change the sensitivity of the camera sensor.
9. Exposure – adjusts the exposure of your photos so that you can avoid
overexposure or underexposure.
10. Anti-shock – turns image stabilization on/o when taking pictures.
11. Quick View – allows you to turn on the short display of your photos on the
camera screen.
12. Timestamp – allows you to turn the date and time stamps on taken photos
on/ o.
PLAYBACK MODE:
1. Delete – deletes the currently selected file or all files of that type.
2. Protection – allows you to enable/ disable the lock on the currently selected file
or all files of a given type.
3. Slide show – turns on the preview of all photos stored in the camera's memory.
GENERAL MENU:
1. Date/ Time – allows you to set the date and time displayed by the device.
2. Auto Power-O – allows you to set the inactivity period after which the camera
will automatically turn o.
3. Beep Sound – allows you to turn the when you press the buttons on/ o.
4. Language – allows you to change the language of the menu.
5. Frequency – allows you to change the frequency at which files are recorded
(50Hz or 60Hz).
6. Screen Saver – set the inactivity period after which the device screen will
be automatically turned o.
7. Format – performs the format of the memory card placed in the device.
8. Defaults – resets the device to factory settings.
9. Version – displays information about the software version of the device.