05. OPERATING THE DVICE
1. Mount the camera and connect it to the power supply.
2. Put in a microSD memory card, formatted to FAT32 file system. WARNING the card
should be put in and take out only when the device is turned o.
3. Set the:
a. time and date,
b. loop recording (set the time of recordings). If you turn loop recording o, files will
not be overwritten,
c. set the highest resolution available,
d. set the G-Sensor to the lowest sensitivity available, so that the camera doesn't
save unnecessary video files when you drive on uneven roads.
4. Make sure that MOTION DETECTION and PARKING MODE are turned o.
If they remain turned on when you're driving, they will interfere with your recording.
Turning parking mode on is recommended only when you leave your vehicle parked.
PARKING MODE can be quickly turned on and o in recording mode by pressing
and holding the DOWN button.
5. The camera will start recording automatically when you turn the engine on (unless
your car has a constant power supply in its lighter socket).
06. MAIN FEATURES OF THE CAMERA
1. Camera mode
The camera has 3 modes of operation. Recording mode: the camera records video.
Photo mode: the camera takes pictures. Video Play mode: browsing the footage
recorded by the camera.
2. Loop recording
The camera divides the recordings into files of length of your choice. When the
memory card is full, the oldest recording will be overwritten.
3. Resolution
The camera can record in many resolutions. The higher the resolution, the better the
quality of recordings, at the cost of more space on the memory card being taken.
It is reccomended that you use the highest resolution available.
21
EN
To Next Page
Loading...
