4. G-Sensor
Gravity sensor. When the sensor is turned on and your car is hit, the recording from
the event will be protected from overwriting. Using the lowest sensitivity setting
is recommended, as at higher settings the sensor can trigger when you drive on
uneven roads and fill up your memory card with files that won't be overwritten.
5. Parking mode
When it's turned on, the camera left in your car (if connected to power supply)
registers the car shaking (for example, due to a parking crash), turns on and starts
recording (the recordings are automatically protected from being overwritten.)
Turning the parking mode o when driving is recommended. It can block the loop
recording function.
6 Motion detection mode
When it's turned on and you leave the camera in standby mode, plugged to power
supply, the camera will turn on and record a short video if it detects motion.
7. Sound recording
The camera can record sound along with video footage.
07. SAFETY MEASURES
1. Do not disassembly or interfere with the camera. If the device is faulty, contact the
service point.
2. Only use the original accessories.
3. Use only the original charger, included in the set. Using a dierent power supply can
aect the battery negatively.
4. Do not use the device for purposes that are against the law of the country or region
you are in.
5. The operating temperature of the device is 0-35°C. Storage temp. is 5°C to 45°.
Operating air humidity is 5-90% without condensation
6. Avoid damaging the device with physical force.
7. Clean the device, especially the lens. Do not use detergents or other chemicals when
cleaning the device.
8. Clean the device only when it's disconnected from the power supply.
22
To Next Page
Loading...
