39
EN
4. G-Sensor
Gravity sensor. When the sensor is on at the time of impact, the recording
file will be protected from being overwritten. It is recommended to set the
lowest available setting, as at a higher level the camera can catch shocks
caused by road bumps, which can cause the memory card to get filled up.
5. Parking mode
When it is turned on, the camera left in the car and connected to power
captures the car's vibrations (for example, caused by a parking bump) turns
on and starts recording. Recordings are automatically protected from being
overwritten. We recommend that you turn it o while driving. It can aect
the loop recording feature by blocking it.
6. Motion detection mode
When it is on and you leave the camera in standby mode and connected
to a power source, the camera will record a short video when motion
is detected.
7. Record audio
The camera, along with video recording, can also record audio.
To Next Page
Loading...
