47
10. LEDS
There are two LEDs on the case of the device.
When the RED LED lights up, the device is connected to the power supply.
The LED goes out when the battery of the device is fully charged.
A BLUE LED lights up to indicate that the device is turned on.
11. PRECAUTIONS
1. Do not disassemble or try to repair the camera yourself. In the event
of device failure, please contact the service.
2. Use only original accessories.
3. Use only the original charger included with the device.
4. The device cannot be used in violation of the laws of your country or region.
5. Operating temperature range of the device is 0 - 35 °C.
Storage: +5 to +45°C. Humidity: 5-90% without condensation.
6. Do not expose the device to damage or physical impact.
7. Keep the product clean, the lens in particular. Do not use detergents
or chemicals for cleaning.
EN
To Next Page
Loading...
