Need help?Do you have a question about the XC-Tracer Maxx and is the answer not in the manual?
General| Connectivity | Bluetooth, USB-C |
|---|---|
| Memory | 8 GB |
| Altimeter | Yes |
| Data Storage | Internal memory |
| Logging rate | Up to 10 Hz |
| Memory Capacity | 8 GB |
| Interface | USB-C, Bluetooth |
| Sensors | Barometric pressure, GPS |
| Power supply | Rechargeable lithium-ion battery |
| Charging | USB-C |
| Supported file formats | IGC, KML |
| Resolution | 0.1 m |
| Weight | 68 grams |
Guidelines for physically mounting the vario and the procedure for powering it on and off.
Information on battery status indication, energy consumption, and charging.
How to adjust audio volume and details on the automatic shutdown feature.
Details the 'Simple Screen' display, showing analogue vario, altitude, speed, and compass.
Explains the 'Standard Screen', adding glide ratio and flight duration to the Simple Screen's data.
Describes the 'Thermal Screen' with altitude curve and thermal assistant for identifying lift and sink.
Details the 'Buddy Screen' for tracking pilots and notes the 'Airspace Screen' status.
Covers serial number, firmware version, reset options, and BLE protocol selection.
Customizes screen combinations, automatic switching, volume, and vario tone behavior.
Defines tone thresholds, custom tones, FLARM IDs, and obstacle database settings.
Manages buddy names/IDs, glider type, and other FLARM-related configurations.
Details Flarm firmware updates and the optional obstacle database for collision warnings.
Procedure for updating the XC Tracer Maxx firmware and reading flight data.
Covers common issues, hard resets, and essential care instructions for the device.
Details the 24-month warranty, exclusions for improper use, and normal wear and tear.
Lists device specifications, certifications, and FCC compliance statements.
To Next Page