12-EN
PLUG REPLACEMENT
(UK & IRELAND ONLY)
If you need to replace the tted plug then
follow the instructions below.
IMPORTAN
The wires in the mains lead are colored in
accordance with the following code:
BLUE =NEUTRAL
Brown = Live
As the colors of the wires in the mains
lead of this appliance may not correspond
with the colored markings identifying the
terminals in your plug, proceed as follows.
The wire which is colored blue must be
connected to the terminal which is marked
with N. The wire which is colored brown
must be connected to the terminal which is
marked with L.
WARNING:Never connect live or
neutral wires to the earth terminal
of the plug. Only t an approved 13A
BS1363/A plug and the correct rated fuse.
NOTE: If a moulded plug is tted and has
to be removed take great care in disposing
of the plug and severed cable, it must
be destroyed to prevent engaging into a
socket.
13 Amp fuse approved
to BS1362
Connect
Blue to N
(neutral)
Outer sleeve
rmly clamped
Brown L(live)
Cable grip
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Postfach 32 02 16, 50796 Cologne,
Germany
Declare that the product
Description: Impact drill
Type designation: EX60ID ( ID-designation
of machinery, representative of Impact drill)
Function: Boring holes in various
materials
Complies with the following Directives,
2006/42/EC
2011/65/EU & (EU)2015/863
2014/30/EU
Standards conform to:
EN 60745-1
EN 60745-2-1
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
The person authorized to compile the
technical le,
Name: Russell Nicholson
Address: POSITEC Germany GmbH
Postfach 32 02 16, 50796 Cologne,
Germany
Su Zhou 2016/04/27
Allen Ding
Deputy Chief Engineer, Testing & Certication
To Next Page