9 Adjusting 2/2
In the harness with quick-adjustment buckle you adjust the strap by pulling loose ends of the shoulder straps
(tightening) or by bending the press of the buckle up (loosening).
Guidelines for how to adjust NextGEN harness:
In properly adjusted NextGEN harness the waist strap should be placed exactly on the waist (you need
to properly adjust the height at which the plate is installed as well as the length of shoulder straps).
Too high or too low location of the waist strap will decrease your comfort.
In NextGEN harness the waist strap shall be fastened so that it is placed onto shoulder straps. The
fastening of the waist strap should press the shoulders straps to the body improving the adjustment of
the harness. You need to take it into consideration while adjusting the harness and check the
adjustment of shoulder straps after you fasten the waist strap.
The length of the crotch strap should be so adjusted that after the fastening the waist strap falls
downwards creating Y shape with the crotch strap.
The crotch strap should not be too short since it could be more difficult to find it while putting on the
harness.
To Next Page
Loading...
