Need help?Do you have a question about the xDEEP NX ZEN and is the answer not in the manual?
General| Brand | xDEEP |
|---|---|
| Model | NX ZEN |
| Category | Diving Instrument |
| Language | English |
Explains the meaning of DANGER and WARNING messages for user safety and equipment protection.
Covers pre-dive checks, avoiding damage, proper inflation, and BC limitations as a lifejacket.
Guidelines for cold water diving, inflator freeze prevention, and managing buoyancy loss risks in confined spaces.
Details the three basic elements of the ZEN system and optional features like weight pockets.
Describes the features and operation of the K-type power inflator, including its buttons and mouthpiece.
Step-by-step instructions for mounting XDEEP two-part weight pockets onto the waist strap.
Explains standard trim pockets and STEALTH 2.0 sidemount trim pockets for weight distribution.
Details how to adjust shoulder straps and crotch strap for comfort and stability in standard harnesses.
Explains strap adjustment using quick-adjustment buckles on the NX Series QR harness for optimal fit.
Provides specific guidelines for properly fitting the NX Series harness, including waist strap and crotch strap placement.
Step-by-step instructions for securely connecting the scuba tank to the BC harness using webbing.
Critical DANGER warning about properly wetting straps to prevent tank detachment and serious accidents.
Instructions for connecting the LP hose to the inflator's quick connector, including pressure warnings.
DANGER and WARNING messages regarding correct port usage and required pressure range for the inflator.
A detailed checklist for inspecting all BC components for wear, tightness, and proper function before diving.
Procedures for testing oral inflation, automatic dump valve, and manual dump valve operation.
Instructions for a 15-minute inflation test and performing a mutual buddy-check for leakages.
How to achieve maximum buoyancy on the surface by inflating the BC using the inflator button.
Guidance on descending safely and maintaining neutral buoyancy during a dive using inflation/deflation controls.
Crucial advice on controlling ascent rate to prevent decompression sickness (DCS).
Steps for disconnecting components and draining water from the BC after a dive.
Instructions for rinsing the BC with fresh water and drying it properly to prevent damage.
Guidance on storing the BC partially inflated and important warnings about keeping it wet.
States that repairs should only be performed by authorized technicians due to the BC's design.
Advises on user-performed maintenance (rinsing) and warns against using detergents or solvents.
Recommends periodic overhaul by an authorized service center for safety reasons.
Lists basic technical specifications of the ZEN system, including BC type, buoyancy, and materials.
Details the inflator type, working pressure range, and permissible tank parameters for the system.
Specifies the operating temperature ranges for water and air for the BC.
To Next Page
