ADJUSTING
When you order a complete buoyancy set, you’re going to
receive all parts assembled and ready to use. However, to
improve the comfort and safety of the user, in the end you
should adjust the shoulder straps and the crotch strap.
NX Series harness is available in two sizes: M and XL.
M-size harness is designed for people of 175cm in height
and shorter, whereas XL-size harness for people taller
than 175cm.
The unique structure of NX Series harness, providing au-
tomatic shortening of shoulder straps after you fasten the
waist strap, combines the advantages of the traditional
technical harness with easiness to put it on and take it
o provided by the harness with easy-to-undo buckles. In
most cases the set requires adjustment only before the
rst dive after the purchase and in the case of changing
the suit, thanks to which, at all times, the user has a set
providing optimal trim and stability.
NX Series harness is traditionally equipped with V-type
crotch strap which distributes pressure on a larger area
and at the same time improves comfort in particular
when you dive with a scooter. If you prefer the traditional
type of crotch strap, contact the producer to obtain
information on how to attach it.
In the basic version of harness the shoulder straps and
the crotch strap are adjusted through shortening or
lengthening the loop which forms at the end of the web-
bing. The following picture shows points where shoulder
straps and crotch strap can be adjusted:
In the harness with quick-adjustment buckle you adjust
the strap by pulling loose ends of the shoulder straps
(tightening) or by bending the press of the buckle up
(loosening).
Fig. 7. Points where shoulder straps and V-type crotch
strap can be adjusted in standard harness.
01
In order to lengthen the shoulder or crotch strap, rst
insert the end of the webbing into the blocking buckle
(stopper) and then take out the excess of the webbing at
the side of the loop. In order to shorten the strap, do the
opposite, i.e. rst insert the webbing at the side of the
loop into the blocking buckle and then take out the excess
of the webbing at its loose end.
Fig. 9. Strap adjustment
KROK 02
Fig. 8. Strap adjustment
KROK 01
Fig. 10. Adjustment of shoulder straps in NX SERIES
QR harness.
02
24 25
To Next Page
Loading...
Need help?
General
