08
CONNECTING THE SCUBA TANK
Guidelines for how to adjust NX Series harness:
1. In properly adjusted NX Series harness the waist
strap should be placed few centimetres below the
waist(you need to properly adjust the height at which the
plate is installed as well as the length of shoulder straps).
Too high or too low location of the waist strap
will decrease your comfort.
2. In NX Series harness the waist strap shall be fastened
so that it is placed onto shoulder straps. The fastening of
the waist strap should press the shoulders straps to the
body improving the adjustment of the harness. You need
to take it into consideration while adjusting the harness
and check the adjustment of shoulder straps after you
fasten the waist strap.
3. The length of the crotch strap should be so adjusted
that after the fastening the waist strap falls downwards
creating Y shape with the crotch strap.
4. The crotch strap should not be too short since it could
be more dicult to nd it while putting on the harness.
ADJUSTING CONT.
26
To Next Page
Loading...
Need help?
General
