CONNECTING THE SCUBA TANK
Attention:
ZEN buoyancy compensator is designed to be used with
tanks of parameters indicated in technical specication
included at the end of this manual. Using this compensa-
tor with other types of tanks, although physically possible,
is not recommended.
In order to connect the tank with the BC in a reliable and
safe manner you should connect the webbing as indicated
in the pictures below:
STEP 01
STEP 03
STEP 02
STEP 04
Fig. 11. Installation of the tape the buckle
DANGER
AN INCORRECTLY CONNECTED TANK MAY UNEXPECTEDLY DETACH FROM THE HARNESS. SUCH SITUATION
IS EXTREMELY DANGEROUS AND MAY RESULT IN A SERIOUS ACCIDENT OR EVEN DEATH. THEREFORE THE
TANK CONNECTION HAS TO BE INSPECTED CLOSELY.
DANGER
BEFORE CONNECTING THE TANK, CAREFULLY WET THE CONNECTING STRAPS. OTHERWISE THEY MAY
LOOSEN AND THE TANK MAY SLIP OUT.
28 29
To Next Page
Loading...
Need help?
General
