xDEEP NX Series User Manual

1.
Double shell PROJECT BCD;
2.
NX Series diving harness of M or XL size, in simple or
easy-to-unfasten version;
The PROJECT BC can be used with any harness which has
two mounting holes of 12mm and a spacing of 11 inches.
However, we recommend using one of high quality CE
certied NX Series harnesses.
On the following pages of this manual we described
particular elements of the system and also their
conguration and adjustment.
PARTS OF PROJECT SYSTEM
Fig. 1. GHOST BCD with basic harness
01
PROJECT system consists of two
basic elements:
A K-type inator is a reliable device made of shock-proof
technopolymer which is resistant to environmental condi-
tions. The inator valve is made of metal, which makes
the inator more resistant to freezing and it can be oper-
ated much longer than inators made entirely of plastic.
The inator is equipped with an inator button (1) to
inate the BC with air, a purge button (2) to deate the BC
or inate it orally, and a mouthpiece (3) to release the air
that is deated or inhale the BC orally.
K-type Power Inflator
03
1
2
2
1
5
6
7
3
4
3
1. Compensator bladder
2. Shoulder strap
3. Waist strap
4. V-type crotch strap
5. Inator hose
6. K-type inator
7. Over pressure relief valve
16 17

xDEEP NX Series Specifications

General

Brand	xDEEP
Model	NX Series
Category	Diving Instrument
Language	English