xDEEP Stealth 2.0 User Manual

12 Trim Pockets
The STEALTH 2.0 harness enables you to mount additional weight pockets practically anywhere, allowing for
optimal placement of the weight, regardless of the type of exposure suit used.
The pockets are mounted on the straps using two attached tri-glides.
The typical places for trim pocket mounting are shown in the picture below:
Fig. 16. The typical places for trim pockets
Fig.15. The trim pocket installed on the harness’ webbing

xDEEP Stealth 2.0 Specifications

General

Number of Cylinders	2
Weight System	Integrated
Inflator	K-Type
Dry Weight (Harness Only)	1.1 kg / 2.4 lbs
Maximum Cylinder Size	2 x 12L
Bladder Material	Cordura