xDEEP Stealth 2.0 User Manual

15 Stealth 2.0 TEC BC 1/2
Independent STEALTH 2.0 buoyancy compensator is designed to be used with most of the SM harnesses in
configuration with one, two, or more cylinders.
The basic elements of the compensator
1. K-Type inflator;
2. Metal parts used for mounting the compensator to the upper part of the harness;
3. Right inflator port for the optional installation of the inflator hose from the right side.;
4. Side bungee mounting points;
5. Over pressure relief valve;
6. Outer shell;
7. Strap mounting the compensator to the harness in the middle part.
8. Lower mounting point of the compensator used for fixing it to the crotch strap.
9. Zipper providing access to the inner bladder.
K-Type inflator
A K-type inflator is a reliable device made of shock-
proof techno-polymer which is resistant to
environmental conditions. The inflator valve is made
of metal, which makes the inflator more resistant to
freezing and it can be operated much longer than
inflators made entirely of plastic.
The inflator is equipped with an inflator button (1) to
inflate the BC with air, a purge button (2) to deflate
the BC or inflate it orally, and a mouthpiece (3) to
release the air that is deflated or inflate the BC orally.
Fig. 21. STEALTH TEC BCD (from the harness side)
8
7
9
Fig.20. STEALTH TEC BCD (from the top side).
6
2
1
5
4
3
Fig. 22. K-type inflator
2
3
1

xDEEP Stealth 2.0 Specifications

General

Number of Cylinders	2
Weight System	Integrated
Inflator	K-Type
Dry Weight (Harness Only)	1.1 kg / 2.4 lbs
Maximum Cylinder Size	2 x 12L
Bladder Material	Cordura