To Next PageTo Next Page
Need help?Do you have a question about the XDP Recreation G Series and is the answer not in the manual?
Specifies age range (3-8 years) and maximum weight capacity per child for safe usage.
Instructs users to read the manual, perform adult assembly, and anchor the unit before use.
Requires placement 6ft from obstructions, on level ground, with hazards cleared.
Advises against hard surfaces; recommends mulch, sand, or gravel for fall safety.
Mandates anchoring the product for stability and to prevent movement during use.
Prohibits use when wet or in high winds; advises anchoring, storage, or restricting use.
Emphasizes following safety statements to reduce injury risk and to warn users of intended use.
Stresses constant adult supervision and adherence to safe play practices for all users.
Check for loose parts, clear area, avoid unauthorized attachments, and inspect for wear before each use.
Guidance on tightening hardware, lubricating parts, checking for rust/deterioration, and repainting.
Details the method for securing equipment to the ground using corkscrew anchors.
Explains securing equipment with concrete footings, suitable for soft soil conditions.
Provides a diagram and explanation for installing concrete footings for stability.
Mandates minimum 8 inches ground clearance and highlights critical importance of proper anchoring.
Tasks include tightening hardware, lubricating, checking coverings, and inspecting parts.
Involves lubricating moving parts, checking seats/chains, and raking surfacing.
Requires removing plastic parts in cold weather and checking/raking protective surfacing.
Details the specific tools needed for assembly, both included and not included.
Instructions on placement, surface, clearance, and securing the unit against unauthorized use.
Guidance on initial loose fitting for adjustments and final tightening of all fasteners.
Covers steps 1-4 for assembling the main frame, top bar, and crossbars.
Details steps 5-6 for assembling standard and Stand R swing seats and chains.
Covers steps 7-8 for assembling the Super Disc swing and attaching it to the frame.
Encompasses steps 9-14 for assembling the slide and its associated components.
Covers steps 15-19 detailing the complete assembly of the seesaw component.
Details what the limited warranty covers, including material, workmanship, and rust on painted parts.
Specifies the warranty applies only to the original purchaser with a receipt and is non-transferable.
Lists exclusions such as normal wear, abuse, misuse, improper maintenance, and unauthorized repairs.
Provides instructions on how to obtain warranty service, contact customer support, and avoid returning the unit.
Provides instructions for registering the purchased product online using the manufacturer batch code.
General| Brand | XDP Recreation |
|---|---|
| Model | G Series |
| Category | Play Sets & Playground Equipment |
| Language | English |
