xDuoo XD05 PLUS User Manual (English)

To Next Page

XD05 PLUS

Quick Start Guide

1. Connect headphone to the unit.

*Note: The XD05 PLUS only supports dual channel Headset, does not support the

mono Headset or Headset with remote control function or microphone function.

2. Connect audio device with the unit.

For details, see "Connecting to the Audio Device”.

3. Turn the power/ volume knob to right to turn on the unit.

For the first time the unit connect with the computer would be taking some time.

4. Play music with the connected audio device.

5. Adjust the volume to your comfort zone, and start enjoying music.

6. Set the GAIN according to your headset, you can also set up BOOST and BASS and

DAC filter according to your preferences.

7. Bind your audio device with the unit with silicon tape to facilitate carrying.

About us

For more product information, please visit our

official website： http://www.xduoo.com

Or scan us directly to enter the official website

Need help?

Do you have a question about the xDuoo XD05 PLUS and is the answer not in the manual?

xDuoo XD05 PLUS Specifications

General

Output Power	1000mW @ 32Ω
THD+N	<0.001%
Output Impedance	<1Ω
Type	Portable Headphone Amplifier
Signal-to-Noise Ratio	115dB
Input	USB, Optical, Coaxial, AUX
Output	3.5mm, 6.35mm
Battery Capacity	5000mAh
DAC Chip	AK4493
USB Input	Type-C
Recommended Headphone Impedance	16-300Ω
Charging Time	Approximately 4-5 hours