1. Use the supplied USB line, and connect to Apple/Windows/Linux computer. Remember
to press INPUT key to USB IN position.
2. Use supplied Lightning to typec cable, to connect with IOS device like iPhone，iPod
Touch. Remember to press INPUT key to USB IN position.
(* Note: For the first time connecting with iphone, you should put the volume of
iphone to the maximum.)
1. Connect headphone to the unit.
*Note: The XD05 PLUS only supports dual channel Headset, does not support the
mono Headset or Headset with remote control function or microphone function.
2. Connect audio device with the unit.
For details, see "Connecting to the Audio Device”.
3. Turn the power/ volume knob to right to turn on the unit.
For the first time the unit connect with the computer would be taking some time.
4. Play music with the connected audio device.
5. Adjust the volume to your comfort zone, and start enjoying music.
6. Set the GAIN according to your headset, you can also set up BOOST and BASS and
DAC filter according to your preferences.
7. Bind your audio device with the unit with silicon tape to facilitate carrying.
Connecting to the Audio Device
5
To Next Page
Loading...
Need help?
General
