Need help?Do you have a question about the Xenyx 1622FX and is the answer not in the manual?
General| Channels | 16 |
|---|---|
| Mic Preamps | 8 |
| Aux Sends | 2 |
| Stereo Channels | 4 |
| FX Processor | Yes |
| Phantom Power | Yes |
| Type | Analog |
| Inputs - Mic Preamps | 8 |
| Effects Processor | Yes |
| USB Interface | No |
| Power Supply | External |
| EQ Bands | 3-band |
| Headphone Output | 1 |
| Line Inputs | 8 mono, 4 stereo |
| Inputs - Line | 8 mono, 4 stereo |
Explains the core functions of signal processing, level setting, and frequency correction in mixing consoles.
Highlights XENYX mic preamps, British EQ, and the integrated multi-effects processor for enhanced audio.
Details FBQ feedback detection, Voice Canceller, and the USB audio interface for versatile use.
Covers mono channel inputs, 3-band EQ, LOW CUT filter, and routing controls like PAN, SOLO, SUB, MAIN.
Explains controls in the interface panel and main section, including MON/FX sends, aux returns, and level meters.
Details balanced XLR mic inputs with +48V phantom power and balanced 1/4" line inputs.
Explains the 3-band equalizer with semi-parametric mid bands for mono channels.
Details aux send controls for monitor mixes and external effects, including pre-fader/post-fader options.
Details routing switches, PAN, SOLO functions, and channel faders for signal management.
Details stereo channel inputs, stereo EQ with specific frequency bands, and aux send functionality.
Explains balance control, mute, SOLO, SUB, and MAIN routing for stereo channels.
Details MON and FX aux send controls in the main section for routing signals.
Describes the use of aux send jacks for connecting monitor amps or external effects devices.
Explains stereo aux return jacks for effects mix return or as additional line inputs.
Details the dedicated monitor output and fader on the 1832FX model.
Explains the control for STEREO AUX RETURN 1 level in the main mix.
Details the stereo fader for AUX RETURN FX on the 1832FX with routing options.
Describes the XPQ surround function for widening the stereo image on the 1832FX.
Explains the RCA jacks for CD/Tape input and output, including voice canceller use.
Details the BNC socket for connecting a gooseneck lamp on the 2442FX.
Explains level meters, monitoring sources (CD/TAPE, SUB, MAIN), and MODE switch functions.
Details the built-in stereo effects processor with 100 presets and control over dry/effect signal mix.
Describes the unbalanced stereo output for external effects devices on 2222FX and 2442FX.
Explains connecting a footswitch to control the effects processor on/off.
Details main outputs, control room outputs, and main mix insert points on the rear panel.
Explains the unbalanced subgroup outputs for routing and recording purposes.
Details insert points for processing channel signals with external dynamic processors or equalizers.
Details direct outputs for recording individual mono channels post-EQ, post-mute, and post-fader.
Covers power supply, +48V phantom power activation, and fuse replacement.
Instructions for attaching rack mounts and installing the console in a 19" rack.
Guidance on using appropriate cables for audio connections, including XLR and 1/4" TS types.
To Next Page
