6
/ / 1.3 Handlebar Installation
REMOVE THE FOUR BOLTS LOCATED
AT THE FRONT OF THE HANDLEBAR
MOUNTING PLATE USING THE
INCLUDED ALLEN KEY.
POSITION HANDLEBAR ASSEMBLY ON
THE HANDLEBAR MOUNTING PLATE
AND ALIGN CLAMP SCREW HOLES WITH
THE MOUNTING PLATE SCREW HOLES.
REPLACE THE REMOVED BOLTS AND
TIGHTEN HANDLEBAR CLAMPS TO
THE HANDLEBAR MOUNTING PLATE.
If you are uncertain about assembly
procedures, contact a professional
to have your eBike professionally
assembled.
1
2
3
Ensure all bolts on the handlebar clamp are secure and tightened before riding.
To Next Page
Loading...
General