Xerox CX PRINT SERVER 550 - Downloading Fonts; Setting up a TCP;IP Printer

Downloading fonts
Use the HF_FontDownLoader hot folder, located in D:
\HotFolders, to install new or missing fonts to the CX print server
fonts directory.
The HF_FontDownLoader hot folder can be used with the following
operating systems:
●
Windows Server 2008
●
Windows Server 2003
●
Windows 7
●
Windows Vista
●
Windows XP
●
Mac OS X 10.4 and later
You can drag the required fonts from the computer to the
HF_FontDownLoader hot folder. In the Resource Center, you can
set a default font and delete fonts.
Note: You can only copy fonts if the font license permits.
Setting up a TCP/IP Printer
Set up a TCP/IP printer on a Windows computer.
Requirements:
The following items must be installed and configured on the
Windows-based computer:
●
TCP/IP
●
The latest PostScript printer driver, AdobePSDriver.exe. You
can find the driver in the shared D:\Utilities\PC Utilities
folder on the CX print server, or you can download the driver
from the Adobe Web site, at
http://www.adobe.com.
●
The PPD file, CX560_V1.PPD. The file is located in the shared
D:\Utilities\PPD folder on the CX print server.
1. Open the Printers window.
2. Select File > Server Properties.
3. Click the Port tab, and then click Add Port.
4. In the Printer Ports window, in the Available Port Types list,
select Standard TCP/IP Port, and then click New Port.
The Add Standard TCP/IP Printer Port wizard appears.
5. Click Next.
12 Chapter 2—Setting up your computer for printing