Xerox DP 820 User’s Guide 33
Maintenance
Xerox DP 820 Projector Specifications
Note: Design and Specifications are subject to change without
notice.
Projection System Single panel 0.55” DLP™ projector
Native Resolution 48,000 dot x 1 (800 x 600 x 1)
Image Brightness 1600 ANSI lumens (typical)
Uniformity 80% (typical)
Lens Manual Zoom (1.2X)
Focal Length 20.2 - 24.2mm
Contrast Ratio 1500:1 (Full on/off) (typical)
Aspect Ratio 1:1, 16:9, 4:3
Screen Size 30 - 200 inches
Lamp 200W
Projection Type Front, Rear Ceiling
Video Input PAL, NTSC, SECAM
Input Source Computer, HDTV, S-Video, Video
Scanning Frequency
Horizontal Frequency
Vertical Frequency
Pixel Rate
31 - 79 KHz
50 - 85 Hz
108 MHz
Digital Keystone Correction Vertical: +/- 15 degrees
Analog RGB (input signal) D-Sub connector
HDTV Display 720p (60 Hz), 720p (50 Hz), 1080i (60 Hz), 1080i (50 Hz)
Integrated Speaker 2W x 1
Audio Noise 34 dB
Remote Control Multifunctional
OSD Language Multi-language
Operational Ambient Temperature: 5° ~ 35° C (41° ~ 95° F)
Certification UL, CE, FCC Class B, VCCI, C-Tick, CCC
Power Supply AC 100 - 240V, 50 - 60Hz
Power Consumption 250W
Dimensions (W x D x H) 254 x 202 x 98 mm
Weight 2.0 kg (4.5 pounds)
To Next Page
Loading...