To Next PageTo Next Page
Need help?Do you have a question about the Xerox iGen Series and is the answer not in the manual?
General| Type | Digital Production Press |
|---|---|
| Resolution | 2400 x 2400 dpi |
| Recommended Monthly Volume | Varies by model |
| Paper Weight | Varies by model |
| Duty Cycle | Varies by model |
| Monthly Duty Cycle | Up to 1, 000, 000 impressions |
| First Print Out Time | Varies by model |
| Supported Media Types | Coated, uncoated, textured |
| Automated Color Calibration | Yes |
| Ink/Developer Type | Dry Ink |
| Standard Paper Capacity | Varies by model (e.g., iGen 5 150: Up to 8, 000 sheets) |
| Finishing Options | Varies by model (e.g., Stacking, Binding, Folding, Cutting) |
Details how the Production Media Cart picks up paper stacks from Xerox stackers.
Explains how the cart unloads intact paper stacks to other devices.
Includes paper stack clamp and locking rear casters for secure transport.
Key parts include HOST, paper table, and alignment tine for pickup.
Includes elevation button, stack transport handle, and on/off switch.
Covers vertical post, support, casters, and stack clamp.
Includes battery, meter, charger, and charging port for power.
Emphasizes reading manual, understanding signs, and safe operational conduct.
Explains interpretation of DANGER, CAUTION, WARNING, and IMPORTANT messages.
Covers training, equipment checks, repairs, and safe operating environment.
Guidelines for direction, visibility, speed, load capacity, and personal safety.
Details inspection checklist and the importance of safety labels.
Instructions for cleaning HOST belts with a clean cloth.
Steps to charge the media cart battery using the external charger.
Details cart dimensions, weight, and supported media sizes.
Specifies maximum stack capacity, load capacity, and pickup/unload heights.
Lists essential kits for docking with XPS and iGen stackers.
Step-by-step guide to position and dock the cart with the XPS stacker.
Procedure to raise the cart and secure the paper stack for transport.
Steps to move the stack from the cart to the CP Bourg BSFEx Air Table.
Guide to unload the paper stack onto a standard work table.
Procedure for delivering the paper stack onto a pallet.
Guidance on using card stock for smaller paper sizes on iGen pallet.
Steps to dock the cart with the iGen Stacker Pallet with Power Eject Kit.
Procedure to lift the paper stack from the iGen stacker.
Steps to move the stack from the cart to the CP Bourg BSFEx Air Table.
Guide to unload the paper stack onto a standard work table.
Procedure for delivering the paper stack onto a pallet.
