9
Deselect Allow Scanning to Default Public Folder
Deselect Require per Job password to public folders
Select Allow additional folders to be created
Select Require password when creating additional folders
Select Prompt for password when scanning to private folder
Deselect Allow access to job log data
5. Scan to Email:
Set the domain filtering to limit the domains to which Scan to E-mail jobs can be sent. Enable the domain
filtering option by following the instructions under “Editing Domain and Email Filter Settings” under
“Configuring Email Security Settings” under “Scanning to an Email Address” in Section 7 of the SAG.
Configure encryption and signing of Scan to Email jobs by following the instructions for “Configuring Email
Encryption Settings” and “Configuring Email Signing Settings”, respectively, under “Configuring Email
Security Settings” under “Scanning to an Email Address” in Section 7 of the SAG. Set the ‘Email Encryption
Enablement’ option to Always On; Not Editable by user.
Configure encryption of Scan to Email jobs sent from the device over SMTP by following the instructions
for “Configuring SMTP Connection Encryption Settings” under “SMTP” in Section 3 of the SAG. Set the
‘Email Signing Enablement’ option to Always On; Not Editable by user.
Configure authentication of SMTP to send Scan to Email jobs or to forward received Embedded Faxes via
email by following the instructions for “Configuring SMTP Authentication Settings” under “SMTP” in Section
3 of the SAG.
To Next Page
Loading...
Need help?
General
