16
Show Web UI Configuration Page - Allows the System Administrator to enable users who are not authenticated
administrators to view the Web UI Configuration Page. Is accessible by typing http://{IP
Address}/diagnostics/ShowConfigSheet.php.
NTLM v2 Response - Allows the System Administrator to enable the device to send only the NT Lan Manager
(NTLM) Version 2 protocol (and refuse the LM & NTLM versions). Is accessible by typing http://{IP
Address}/diagnostics/NTLMSecurity.php.
Custom Size Allowed - Allows the System Administrator to allow custom size paper to be used for print jobs. Is
accessible by typing http://{IP Address}/diagnostics/customSizeAllowed.php.
Copies Per Page Print Setting - Allows the System Administrator to permit the use of the copies per page
setting for print jobs. Is accessible by typing http://{IP Address}/diagnostics/copiesPerPage.php.
HTTP SSL Cipher Encryption Strength - Allows the System Administrator to control the set of supported
ciphers when using SSL (e.g., to enforce 128 bit or higher encryption keys). Is accessible by typing http://{IP
Address}/diagnostics/SSLCiphers.php.
Port 9100 Print Stream Filtering - Allows the System Administrator to enable/disable the filtering of the RAW IP
print stream for the occurrence of the PostScript control-T character. Is accessible by typing http://{IP
Address}/diagnostics/Port9100PrintStreamFiltering.php.
Install Software (View Scan Templates Created by WIA Driver) - Allows the System Administrator to install the
#00022121 Network Controller version to view templates created by the Microsoft Windows Image Acquisition
(WIA) driver. Is accessible by typing http://{IP Address}/diagnostics/00022121.dhtml. The System
Administrator should be aware that installing this Network Controller version will result in the device no longer
being in the evaluated configuration.
Cost Control Enablement and Receipt Printing Setup - Allows the System Administrator to enable the Cost
Control feature when Secure Access and network accounting are enabled. Is accessible by typing http://{IP
Address}/diagnostics/CostControl.php.
Note: This page will only be accessible if network accounting is enabled, so it will not be displayed for a device in
the evaluated configuration.
Scan Image Compression - Allows the System Administrator to manage the asymmetric sub sampling options of
scan image processing. Is accessible by typing http://{IP Address}/diagnostics/asymmetricSubSample.php.
Enable Scanning Multithread Processing - Allows the System Administrator to manage the enablement for
multithread scan image processing. Is accessible by typing http://{IP
Address}/diagnostics/multiThreadingEnableDisable.php.
Tray 1 and 2 Label Support (WorkCentre 58XX Only) - Allows the System Administrator to enable the use of
labels in Trays 1 and 2. Is accessible by typing http://{IP Address}/diagnostics/labelsPfm.php.
TIFF Rotation for Scan to Email - Allows the System Administrator to enable a special TIFF rotation when
processing Scan to Email jobs that saves time and processing power. Is accessible by typing http://{IP
Address}/diagnostics/enableTIFFRotation.php.
Port 9100 Parse PDF Format - Allows the System Administrator to enable the printing of PDF files over Port
9100 that have added data to the beginning or the end of the file. Is accessible by typing http://{IP
Address}/diagnostics/Port9100ParsePDF.php.
Enable/Disable Selective Spooling - Allows the System Administrator to enable or disable Selective Spooling
that sends incoming print jobs directly to the PDL interpreter and bypassing the spooling to disk step. Is
accessible by typing http://{IP Address}/diagnostics/SelectiveSpooling.php.
Certificate Signing Request - Allows the System Administrator to configure the Certificate Signing Request
(CSR) feature on the device to not include the device’s IPv4 address as the Common Name (CN) entry in the
‘Subject’ field so the CSR has only a single CN entry. Is accessible by typing http://{IP
Address}/diagnostics/singleCN.php.
Duplicate Mailbox Cloning Policy - Allows the System Administrator to set the policy for cloning duplicate
mailboxes. Is accessible by typing http://{IP Address}/diagnostics/enableDuplicateMailbox.php.
Send PJL Job Name - Allows the device to process jobs submitted without the PJL JOB NAME = command in
the PJL JOB END. Is accessible by typing http://{IP Address}/diagnostics/sendPJLJobName.php.
Allow Null LDAP Password - Allows a user with NULL password to successfully log into the device. Is
accessible by typing http://{IP Address}/diagnostics/LDAPAllowNullPassword.php.
To Next Page
Loading...
Need help?
General
