Always stay alert when using C-20T 3-axis FPV Gimbal and its accessories to
control an unmanned aerial vehicle (UAV) or other carriers. Careless may result
in serious harm to yourself and others.
1. Make sure that the external power supply for the gimbal is a lithium battery
(2S~6S) with an input voltage between 7.4V~26.4V. Otherwise, the gimbal
may work abnormally or be damaged.
2. DO NOT short circuit the power output and GND. Otherwise, the equipment
may be damaged and may not work properly.
3. Follow the instructions in the user manual when installing the gimbal.
Incorrect installation may cause the gimbal to not work properly.
4. Make sure that all connectors are secure and all parts are work properly.
5. Make sure you fully understand and abide by local laws and regulations
before using this product.
6. This product is not intended for children.
Caution
To Next Page
Loading...