Need help?Do you have a question about the XFIRE AUDIO XFR1200.4 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Power Output (RMS) | 1200W |
| Power Output (Peak) | 2400W |
| RMS Power @ 4 Ohms | 150W x 4 |
| THD at Rated Power | <0.05% |
| Input Sensitivity | 0.2V - 6V |
| Impedance | 2-4 Ohms |
| Crossover Frequency | 50Hz - 500Hz |
| Bass Boost | 0dB - 12dB @ 45Hz |
Crucial safety precautions for amplifier installation and operation.
Instructions for making a secure and short ground connection to the vehicle chassis.
How to connect the remote terminal to turn the amplifier on and off.
Guidelines for connecting the main power lead directly to the vehicle battery.
Connecting speakers while observing polarity and impedance limits.
Wiring configurations for stereo and mono bridged modes.
Wiring for stereo and mono bridged subwoofer configurations.
Steps to diagnose and resolve no sound issues when the power LED is off.
Steps to diagnose and resolve no sound issues when the power LED is on.
Steps to diagnose and resolve issues when the protection LED is illuminated.
To Next Page
