xFusion Digital Technologies 02313MKD - Storage; Drive Configurations; X 2.5 Drive Pass-Through Configuration

FusionServer 2288H V6 Server
Technical White Paper
5 Hardware Description
2022-06-25
154
⚫
Memory Mirroring
⚫
Memory Single Device Data Correction (SDDC)
⚫
Failed DIMM Isolation
⚫
Memory Thermal Throttling
⚫
Command/Address Parity Check and Retry
⚫
Memory Demand/Patrol Scrubbing
⚫
Memory Data Scrambling
⚫
Memory Multi Rank Sparing
⚫
Post Package Repair (PPR)
⚫
Write Data CRC Protection
⚫
Adaptive Data Correction - Single Region (ADC-SR)
⚫
Adaptive Double Device Data Correction - Multiple Region (ADDDC-MR)
⚫
Partial Cache Line Sparing (PCLS)
5.2.5 Storage
5.2.5.1 Drive Configurations
5.2.5.1.1 8 x 2.5" drive pass-through configuration
Drive configuration
Table 5-54 Drive configuration
Configuration
Front Drive
Rear Drive
Built-in Drive
Drive
Management
Mode
8 x 2.5" drive
pass-through
configuration 1
⚫
Front drive:
8 x 2.5"
− Slots 0 to
7 support
only
SATA
drives.
⚫
I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drives
a
.
-
⚫
SATA
drive: PCH
⚫
NVMe
drive: CPU
8 x 2.5" drive
pass-through
configuration 2
⚫
Front drive:
8 x 2.5"
− Slots 0 to
7 support
only
SAS/SAT
A drives.
⚫
I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drives
a
.
-
⚫
SAS/SATA
drive: 1 x
screw-in
RAID
controller
card
⚫
NVMe
drive: CPU
8 x 2.5" drive
pass-through
configuration 3
⚫
Front drive:
8 x 2.5"
− Slots 0 to
7 support
⚫
I/O module
3: 4 x 2.5"
− Slots 44
to 47
-
⚫
SAS/SATA
drive: 1 x
PCIe RAID
controller