Need help?Do you have a question about the XIAMEN OCULAR GDM12864A and is the answer not in the manual?
General| Brand | XIAMEN OCULAR |
|---|---|
| Model | GDM12864A |
| Category | Control Unit |
| Language | English |
Lists key attributes of the GDM12864A LCM module.
Details physical dimensions and sizes of the LCD module.
Specifies operating and storage temperature ranges for the module.
Outlines performance metrics like viewing angle and contrast ratio.
Describes the function and pinout of the module's interface.
Defines voltage and current limits for the KS0107B driver.
Provides DC electrical parameters for the KS0107B driver.
Defines voltage and current limits for the KS0108B driver.
Provides DC electrical parameters for the KS0108B driver.
Overview of the KS0107B driver IC functions.
Details AC timing parameters for the KS0107B driver.
Describes operation in master mode for the KS0107B.
Explains operation in slave mode for the KS0107B.
Explains the functional aspects of the KS0107B.
Describes the RC oscillator circuit for timing generation.
Details how timing signals are generated.
Explains duty selection options for the driver.
Covers data shift and phase selection mechanisms.
Overview of the KS0108B driver IC functions.
Details AC timing parameters for the KS0108B driver.
Specifies clock timing parameters for the KS0108B.
Outlines timing for display control signals.
Describes the interface between MPU and the driver.
Explains fundamental operation and methods.
Details the function of the input/output buffer.
Describes the input register's role in interfacing.
Explains the function of the output register.
Covers the reset procedure and its effects.
Explains the busy flag status for operation monitoring.
Describes the control for turning the display on or off.
Explains the X page register for data RAM addressing.
Details the Y address counter for data RAM addressing.
Describes the display data RAM storage.
Explains the register for setting the display start line.
Details instructions for controlling display operations.
Covers instructions for controlling display on/off state.
Instruction to set the Y address for data RAM.
Instruction to set the X address for data RAM.
Instruction to set the display start line.
Instruction to read the device status.
Instruction to write data to the display RAM.
Instruction to read data from the display RAM.
To Next Page