Why is my Xiaomi H101 not working?
If your Xiaomi Hair Dryer isn't working when plugged in, first, make sure that the hair dryer is turned on. Then, check that the power cord is securely plugged into the outlet. If it still doesn't work, there may be an internal circuit issue, and you should contact the after-sales service team.
How to fix a Xiaomi Hair Dryer that doesn't emit air?
If your Xiaomi Hair Dryer is not emitting air, or only a small amount of air, it is likely that the air intake is blocked. Turn off and unplug the hair dryer, then clean the air intake to resolve this issue.
What to do if my Xiaomi H101 Hair Dryer blows cold air in hot air mode?
If your Xiaomi Hair Dryer blows cold air when set to hot air mode, it's likely that the temperature became too high, triggering the overheating protection. To resolve this, switch off the power and unplug the hair dryer. Allow it to cool down completely before using it again.
General| Rated Power | 1600 W |
|---|---|
| Power | 1600 W |
| Speed Settings | 2 |
| Cool Shot Button | Yes |
| Foldable Handle | Yes |
| Rated Frequency | 50 Hz |
| Frequency | 50 Hz |
Describes warning symbols and their meanings for safe operation.
Covers initial warnings and cautions for safe use and to prevent hazards.
Information on electronic waste disposal and recycling requirements.
Instructions for attaching and detaching the 360° rotatable air nozzle.
Covers turning the hair dryer on and selecting air flow speed settings.
Procedure for cycling between cold air and hot air modes.
Safety tips during operation, keeping hair away from intake and outlet.
Procedure for switching off the hair dryer and unplugging the power cord.
To Next Page
